​ 90º Concealed Siamese - Double Clapper Angle Body Only

UL Listed FM Approved. Applicable as a flush mount double clapper Fire Department Connection.Double clapper design ensures water supply from supplementary source(s). The Auxiliary Inlet Connection allows in excess of 500 G.P.M. supplementary water supply for fire protection system. Angle body and field adjustable clappers allow for a top or bottom inlet.Available Sizes and Threads: 4" GRV x 2½" x 2½" NST 350-175-02755 , 4" GRV x 3" x 3" NST 350-175-03400 Available Sizes and Threads: 4" NPT x 3" x 3" NYCC 350-175-02760 , 6" GRV x 3"x 3" NST 350-175-04394 , 6" NPT x 3"x 3" NST 350-175-04395

90º Exposed Siamese - Double Clapper

Brecco FDCs are UL Listed and FM Approved in accordance with NFPA.​ Each FDC is made of solid brass construction and double clapper design. 4" NPT x 2½" x 2½" NST 350-175-02651 , 6" NPT x 3" x 3" NST 350-175-04380Available Sizes and Threads: 4" NPT x 3" x 3" NST 350-175-02660 , 6" NPT x 2½" x 2½" NST 350-175-02784

1-Piece Headguard w/ Baffle

Standard Item# 100-350-00160Short Item# 100-350-00140Fits 1/2" or 3/4" Fire SprinklersDurable wire mesh constructionEasy installation with dual hook attaching system

1105 Satellite Blvd, Suwanee GA 30024

304SS Flange Packs

316SS Flange Packs

90º Degree 4"x 2½"x2½"- Single Clapper

FDCs are UL Listed and FM Approved in accordance with NFPA. Each FDC is of solid brass construction and single clapper design.

Anaerobic Pipe Sealant

Available Volume: 250 Ml - Tube 250-250-00020 / 750ml - Friction Top 250-250-00040 / 1 Quart - Friction Top 250-250-00060Allows disassembly with normal tools.Replaces pipe dope and sealing tapes. • UL Listed Easy to clean excess with soap and water. 100% leak-free seal.Will not dry out when container is left open. Will not thin in summer or thicken in winter.

Angle Hose Valves

Brecco Angle Hose Valves feature all brass construction with cast bodies for rigidity and light weight. Rated to 300 Lbs. Compatible with a Fire Hose Rack Assembly or as a Fire Department Connection Outlet.​ UL and FM approved. Comes with optional chrome plate finish.

Angle Test & Drain

Angle Test & Drain PRV

Angle Valve

Brass Angle Valve with rubber discRated at 200 PSIFor use as trim or drain valves

Anti Freeze - Glycol Based

Propylene Glycol-based Non-Toxic Freeze Protection FluidFlow protection to below -33°F Burst protection lower than -71°F PRE-MIXED TO NFPA GUIDELINES

Anti Freeze Glycerine-Based

Glycerine-based Non-Toxic Freeze Protection Fluid Flow protection to below -25°FBurst protection lower than -50°F PRE-MIXED TO NFPA GUIDELINES

Ball Drip Valve

Ball Valve

Bell Back Box

Weatherproof

Boiler Drains

Drain complies w/ ANSI B1.20.1Hose threads comply with ANSI BI.20.7

Brass Check Valve

UL Listed. Brecco Check Valves close to prevent backward flow of liquid.Available Sizes and Threads: 2" GxG 700-225-00410 , 2½" GxG 700-225-00420 Available Sizes and Threads: 3" GxG 700-225-00440 , 4" GxG 700-225-00350 Available Sizes and Threads: 4" (GRVxMT) GxT 700-225-00340 , 4" (FTxMT) TxT 700-225-00360

Brass Extensions

Brass Reducer

Constructed with 2½” Female NST x 1½” Male NST.Brecco Brass Reducers are Cast Brass.Available Sizes and Threads: 2½" FNST x 1½" MNST Red. 350-125-01240 , 2½" FNST x ¾" MGHT 350-125-01880Available Sizes and Threads: 2½" NYCC x 1½" NST 350-125-01900 , 2½" NYFD x 1½" MNST 350-125-01905Available Sizes and Threads: 2½" FNST x 2" MNPT 350-125-01960 , 2½" FNST x 1½" MNPSH Red. 350-125-01940

Brass Swing Check Valve

Brecco Brass Swing Check Valves come constructed with rubber seats, nuts, and washer. Brass body. Rated at 200 PSI.Brecco small pipe check valves are brass made with a rubber seat feature and a full floating clapper assembly.Lead Free version available in sizes: 1" , 1¼" , 1½" , 2"

Break Locks

Break shackle locks are to prevent tampering with control valves.Locks are keyed alike to allow easy access to secured valves by authorized personnel.Two keys included with each Lock.

Bushings

UL Listed / FM Approved

Cap and Chain

Each is constructed with Female Caps w/ pins and come attached with a hook and chain.Plastic can prevent debris buildup but is not pressure testing suitable. For use with hose valves.Available Threads: NST , PHX , TMP , NYCC , NYFD​Available Finishes: Brass, Chrome, Plastic (red)​Available Sizes: 1½" & 2½"​

Ceiling Flange

3/8" Malleable Iron, UL Listed, with plain finishing

Check Snoot with Pin Lug Swivel

UL Listed/ FM Listed and ApprovedBrecco Check Snoots are brass made and help prevent water back flow into connected supply linesAn NST plug should be used to prevent debris from waterway entrance.Available in all rough and polished brass

Clevis Hanger

SteelUL ListedPlain, Electro-plated Copper, Galvanize​ Finishings

Coach Screw Rod

Commercial Riser

UL Listed Assembly. Each riser is factory tested at 200psi Available with "Test and Drain" or Ball Valve designs.Built in System Sensor Water Flow Switch assures optimum sensitivity Built in port allows hydrostatic testing without draining the system. ¼” 3-way valve allows for easy testing and replacing of pressure gaugeComes with Base Trim and/or Test & Drain

Coupling Grease - Pipe Lubricant

Brecco's Phoenix Coupling Grease eases the installation of mechanical fittings. Specifically designed for mechanical couplings.Will not dry out or freeze in normal applications.Available Volume: 1 QuartNow FBC approved for use with CPVC.

Couplings

UL Listed / FM Approved

CPVC Cements

CPVC Cement Cure Time Minimum Cure Time Table for Pressure Test up to 200 psi Email info@breccocorp.com for additional cure time timetable

CPVC Hangers

UL Listed to support Fire Sprinkler CPVC piping. ​Designed to be used as a hanger and restrainer for CPVC piping. Packaged individually with approved screws. Brecco "standoff" design eases installation by eliminating the need for wood blocking.

Cutting Oil - Dark

Brecco Cutting Oil extends threading machine die life and the quality of the threads. Has several times the film strength of ordinary cutting oils. Its high percentage of sulfur and chlorine absorbs and radiates heat. It is positively non-gumming.

Drive Screws

Drop-In Anchors

Drum Drip Auxiliary Drain

Ready to Install1” UL/FM Ball ValvesRated to 175 psi / Tested to 700 psi36 Hour Ice Build-Up Test with no damageMade in the USA. Item# 650-375-00070.

Ductile Iron Fittings

Electric Bells

Indoor and outdoor installationUL Approved

Extension Ring

Extension Tubes

For use with cup & skirt escutcheons. Tubes are wrapped for protection of surface.Made from stainless steel. To be used with our 2-Piece retrofit escutcheons.Available in: 4" , 6", and 8" , 10"

FDC Break Caps

Brecco Break Caps come in aluminum or plastic.Break Caps are packaged two per set and are equipped with eye bolts and nuts. Designed to break in an emergency.Available Options: 2½" (2pcs) Metal RED 350-125-01800 , 2½" (2pcs) Plastic RED 350-125-01780 , Available Options: 3" (2pcs) Alum GREEN 350-125-01840

Flange Packs

Available Sizes: 2” , 2½” , 3" , 4” , 5” , 6” , 8” , 10"

Flanged NRS Gate Valve - Resilient Seated

Available Sizes: 4" , 6" , 8" , 10" , 12"Valves comply with AWWA C515. UL Listed and FM approved.300 psi Rating Brecco NRS Resilient Sealed Gate Valve is constructed with triple O-ring stem seal and a NPT brass plug on the body.Comes equipped with an indicator post flange and a 2" square operating nut. No rising stem. Internally and externally fusion bonded epoxy powder coated for corrosion protection. Flange designed to EN1092-2 PN10 / PN16, ANSI B16.I Class 125 (others available upon request). Maintains working pressure of 300psi & working temperature of 33.08°F to 125.6°F.

Flanged OS&Y Gate Valve - Resilient Seated

Valves comply with AWWA C515. UL and FM approvedBrecco OS&Y Resilient Gate Valve is constructed with a high quality graphite stem seal and a NPT brass plug on the body. A heavy duty nut attaches the hand-wheel to the yoke. Internally and externally fusion bonded epoxy powder coated for corrosion protection.Flange designed to EN1092-2 PN10 / PN16, ANSI B16.I Class 125 (others available upon request)Maintains working pressure of 300psi & working temperature of 33.08°F to 125.6 °FAvailable Sizes: 2.5" , 3" , 4" , 5" , 6" , 8" , 10" , 12"

Flat Washers

Floor & Ceiling Plates

​1 Piece plastic plates come with a split for ease of installation. Chrome plated heavy gauge steel with locking tab and spring inserts for tight fit

Floor Control Pak

Full Face Gasket

Styled for 150 lb and 300 lb sized flanges.1/8” Thick Rubber.Full Face Non Asbestos Gasket available and styled for 150 lb & 300 lb pipe flanges

Full Face Gasket - Non Asbestos

FxF Brass Double Swivel

Brecco Cast Brass Double Swivel is used to connect a fire hose to a standpipe or sprinkler system. Comes with a cast brass finish and a chrome or polish brass optional finish.

FxF Brass Hex

Brecco F x F Brass Hex Adapter is equipped as a hexagon hose connector, with Female NPT x Female NST. Cast Brass finish with an optional chrome finish.

FxM Brass Bushing

Brecco F x M brass hex bushing is equipped with male NST x female NPT or NST threads.

FxM Brass Hex

Brecco F x M Hexagon hose adapter is equipped with Female NPT x Male regional hose threads.Finish: Cast Brass; Optional Finish: Chrome

Galvanized Wall Plate

Made from malleable iron and galvanized for superior corrosion resistance.

Gas Cock

Lead FreeAvailable Sizes: ½" Gas Cock 700-425-00020 , ¾" Gas Cock 700-425-00040 , 1" Gas Cock 700-425-00060

Gauge Kits

Stainless Steel Gauges(UL Listed and FM Approved) Pre-packaged with necessary componentsKits Available: 100-325-00080 : Air/water 300psi, ¼" x 4" Nipple, ¼" 3-way Valve, ¼" Plug, ½" x ¼" Hex Head Bushing100-325-00760 : Air Only 250 Psi, ¼" x 4" Nipple, ¼" 3-way Valve, ¼" Plug, ½" x ¼" Hex Head Bushing

Globe Valve

Rated at 200 PSIBronze Globe Valves are specifically designed for use in fire sprinkler systemsTypical use is in trim or drain applicationsHand wheel - JIS FC 20 painted RedFor use as trim or drain valves

Grooved Butterfly Valve

UL Listed/FM approvedPressure rated for 300 PSIIndoor/Outdoor useFlag type position indicatorPrewired Double Tamper Switch Ductile Iron bodyAvailable Sizes: 2½" 700-325-00160 , 3" 700-325-00180 , 4" 700-325-00200 Available Sizes: 6" 700-325-00240 , 8" 700-325-00260 , 10" 700-325-00265

Grooved Butterfly Valve w/ Lever Handle

Comes with Lever Handle.Design Standrad: MSS SP-67Connection Ends: Groove to AWWA C606Top Flange Standrard: ISO 5211Lever Operated - 10 position lockable handleWroking Pressure: 300 PSICoating: Fusion Bonded Epoxy Coating in accordance with ANSI/AWWA C550 or painting upon requestNSF/ANSI 61NSF/ANSI 372Available Sizes: 2" 700-325-00700 , 2½" 700-325-00720 , 3" 700-325-00740 Available Sizes: 4" 700-325-00760 5" 700-325-00780 , 6" 700-325-00800 , 8" 700-325-00820 (Gear Operated) , 10" 700-325-00840

Grooved Check Valve

FM Approved and UL/ULC Listed.All Stainless steel wetted parts to provide superior corrosion resistance.EPDM non-stick leak tight sealing. Easier and faster to maintain and install. Low pressure drop.Available Sizes: 2" 700-225-00500 , 2½" 700-225-00520 , 3" 700-225-00540 Available Sizes: 4" 700-225-00560 , 6" 700-225-00580 , 8" 700-225-00400

Grooved Fittings

Grooved NRS Gate Valve - Resilient Seated

Headguards

Brecco Sprinkler Head Guards provide protection from occasional light contact in warehouses, institutional and other applications.

Hex Head Bolts

Grade 2 - Zinc coatedAvailable Sizes: ⅝" x 2½" , ⅝" x 3" , ¾" x 3½" , ⅞" x 4"

Hex Head Nuts

Grade 2 Zinc coated to ensure corrosion resistance.Available Options: 3/8" Hex Head Nuts , 1/2" Hex Head Nuts , 5/8" Hex Head Nuts , 3/4" Hex Head Nuts , 7/8" Hex Head Nuts

Hole Saws

1-3/8” Depth cuts through 2” x 4” in one easy pass4/6 Variable Pitch Tooth combination, reduces vibrationDeep Gullet design, for improved chip removalTough 3/16” thick back plateCuts holes in wood, plastic, or any machinable metal, including nail-embedded wood, plywood, pipe, stainless steel, etc.

Hose

The Wilco Peerless 500 is an emergency fire hose for interior use. Hose is designed for racks and reels with a 100% Synthetic woven jacket and single ply w/ thermoplastic lining.Available with Brass or Chrome couplingsAvailable Sizes: 1½" x 50' Hose w/BR CPLG 350-100-00380 , 1½" x 75' Hose w/BR CPLG 350-100-00400 , 1½" x 100' Hose w/BR CPLG 350-100-00420

Hose Cabinet

Brecco Hose Cabinets are constructed of 16 gauge Cold Rolled Steel and come with valve knockouts. Interior and exterior are treated with our exclusive WILCO "PRO-TECH" Premiere prime coating system. The door is fitted with 3/16" clear glass, stainless steel concealed latch, and reinforced piano hinges.

Hose Rack Accesories

Swing Rack for 1½" HOSE RACKS UL, ULC and FM Listed

Hose Racks

Brecco Hose Racks are Rated for Class II Service under NFPA/FEMA class of service.2.5" Rack also available with 125' Hose.

Identification Signs

Fire Department Connection Signs come in aluminum, brass, chrome, or plastic.Available Sizes: See Catalog for Details (page 9) : 2½" IPS , 8" X 4" , 4"

In Line Check Valve

Rated at 200 PSI.Brecco In-Line Check Valves are brass constructedEquipped with both an O-ring seat and a spring loaded clapper

Jr. Top Beam Clamp

​Malleable IronUL Listed/FM ApprovedPlain Finishing

Lag Bolts

​ Zinc plated for corrosion resistance. Used in heavier load applications ​

LF Brass Fittings

LF Brass Nipples

Liquid Filled Gauges

​ Glycerine filled w/ Glass Face & Stainless Steel case

Malleable Iron Fittings

Metacaulk

Mitch Bevill

MJ NRS Gate Valve - Resilient Seated

Model A Semi Recessed Escutcheon - Large

Model B Semi Recessed Escutcheon - Standard

For use with ½” and ¾” IPS sprinkler heads. Canopies have approximately ¾” adjustment.

Model C Semi Recessed Escutcheon - Short

For use with ½” and ¾” IPS sprinkler heads. Canopies have approximately ¾” adjustment.

Model D - Threaded Semi Recessed

For use with ½” IPS sprinkler heads. Canopies have over a ½” adjustment. Available in Sizes: ½" Chrome Plated 100-225-00320 & ½" White 100-225-02840

MxF Brass

Brecco M x F Hexagon hose adapter is equipped with Female NPT x Male regional hose threads. Finish: Cast Brass; Optional Finish: Chrome

MxF Brass Swivel

Brecco hexagon swivel hose adapter comes equipped with Male NPT x Female regional hose thread swivel. Comes with ball berings and set screw.Finish: Cast Brass Optional Finish: ChromeAvailable Sizes: 1½" MNPT x FNST 350-125-00755 , 2½" MNPT x FNST 350-125-00720 , 2" MNPT x 2½" FNST 350-125-00710

MxM Brass Hex

Brecco M x M Brass Hex Adapter is equipped as a hexagon hose nipple, with Male NPT x Male regional hose thread. Cast Brass finish with an optional chrome finish.

New Location

Nipples

Nozzles

Brecco Lexan Nozzle is rated for Class II Service under NFPA/ FEMA class of service.Brecco Play Pipe is 30" long and made with rugged brass construction.Brass nozzle comes in Satin Brass and has optional chrome plating. Equipped with NST thread inlet w/ swivel handle and 1⅛” orifice.

One Piece Canopy

For use with ½” and ¾” IPS sprinkler heads with weep hole for leak detection.These canopies are made of heavy steel, making them hard to bend. ​

Orifice Unions

For use in Fire Pump Controller linesPart Number: 100-125-00220

OS&Y Brass Threaded Gate Valve

​Available Sizes: 1" , 1.25" , 1.5" , 2"Approved at 175 lbsWOG 100% Pressure Tested Rising Stem UL Listed/FM ApprovedContains Lead. Not for use in Water Systems intended for human consumption.

Pilot Clamp

PILOT CLAMP® with levelsSix interchangeable hole saw guides, sized for 1-3/4” and 2"Six Lenox® Bi-Metal hole sawsTwo Lenox® arborsPilot bitHole size chartCarrying caseDrill up to a 2” diameter hole in pipe up to 4” in diameterCuts a cleaner hole with no wobble and cuts holes with or without a pilot bitDrill in tight cramped areas, vertical or horizontal

Pipe Dope

Brecco Pipe Dope is a Power Plus Thread Sealant Paste w/ PTFE.Formulated as a low cost, high performance thread sealant. Now FBC approved for use with CPVCAvailable volume: 1 Qt Brush Top 250-250-00240 / 1 Qt Metal Can 250-250-00280Available volume: 1 Qt Screw Top 250-250-00260 / 1 Gal Friction Top 250-250-00300 / 5 Gal Friction Top 250-250-00320

Pipe Dope Brush

Pipe Paint Markers

​ Outdoor & Indoor useQuick dryingWaterproofHighly visibleResists abrasionsFade resistant paintFor industrial use only