45 Degree Elbow

UL Listed / FM Approved

90 Degree Elbow

UL Listed / FM Approved

Caps

UL Listed / FM Approved

Crosses

UL Listed / FM Approved

Flange Adapter

Designed to connect ANSI Class 125 or 150 flanged components to a grooved piping system Made of a ductile iron conforming to ASTM A-536. Every lot is metallurgically examined to insure compliance Provided with EPDM rubber gasket as standard, suitable for -30˚F to 150˚F (-34˚C to 110˚C) Available with hot dipped galvanized coating

Flexible Coupling - Style 12

Provides joint flexibility required in some piping systems Conforms to the requirements of ANSI B31.1 Power Piping Code; ANSI B31.9 Building Service Pipe Code and NFPA 13 Sprinkler Systems Supplied with pre-lubed gasket Available with hot dipped galvanized coating as optional

Grooved Fittings - Short Pattern

Sized to improve flow Designed to Fire Protection Industry standards for short patterned fittings Made of durable, high-strength ductile iron conforming to ASTM A536; every lot is metallurgically tested for compliance Available with hot dipped galvanized coating

LF Brass Fittings

Mechanical Tees

Mechanical Branchlet provides a direct branch connection at any location along the pipe run without welding. A hole cut along the center line of pipe will receive the hole locator collar to secure the outlet. A pressure responsive gasket molded to suit the run pipe insures leak tight joints. Cross type connections can be made utilizing upper housings only. Available with hot dipped galvanized coating.

Reducer Tee

All fittings are full flow design Made of durable, high-strength ductile iron conforming to ASTM A536; every lot is metallurgically tested for compliance Available with hot dipped galvanized coating

Reducing Coupling

​Replaces two couplings and in-line reducer (concentric or eccentric) Available with hot dipped galvanized coating Nominal Sizes: 1½” x 1¼” 2” x 1¼” 2” x 1½” 2½” x 2” 3” x 2” 3” x 2½” Nominal Sizes: 4” x 2” 4” x 2½” 4” x 3” 5” x 4” 6” x 4” 8” x 6”

Rigid Coupling

Provides joint rigidity, for the support and hanging requirements of ANSI B31.1 Power Piping Code; ANSI B31.9 Building Service Pipe Code and NFPA 13 Sprinkler Systems Tongue and groove arrangements in housings do not permit expansion, contraction or deflection Available with hot dipped galvanized coatings as optional Supplied with pre-lubed gasket

Standard Concentric Reducer

All fittings are full flow design Made of durable, high-strength ductile iron conforming to ASTM A536. Every lot is metallurgically tested for compliance Available with hot dipped galvanized coating

Standard Drain Elbow

Provides 1” NPT drain required on some fire protection stand pipes Smoother flow than fabricated segmented steel elbows Made of ductile iron conforming to ASTM A536 Every lot is metallurgically tested to insure compliance Available with hot dipped galvanized coating Pressure rating of 300 lbs. Available Sizes: 2" , 2½" , 3" , 4" , 6"

Standard Grooved Fittings

All fittings are full flow design Specifically for use in HVAC Systems Made of durable, high-strength ductile iron conforming to ASTM A536; every lot is metallurgically tested for compliance Available with hot dipped galvanized coating Suitable for HVAC, plumbing, & fire protection systems

Tee Lock

Molded gasket for each header size is made to last and insure a leak tight connection Wrap around casting is combined with a high tensile U-bolt flattened to prevent pipe deformation Rated for 300 psi. UL Listed and FM Approved Manufactured from Ductile Iron, per ASTM A536 Grade E EPDM gasket rated for -30ºF to 150ºF* Available Sizes: (See Cut Sheet for Dimensions) 1¼ x ½ , 1¼ x ¾ , 1¼ x 1 , 1½ x ½ , 1½ x ¾ , 1½ x 1 , 2 x ½ , Available Sizes: (See Cut Sheet for Dimensions) 2 x ¾ , 2 x 1 , 2½ x ½ 2½ x ¾ , 2½ x 1 , 3 x ½ , 3 x ¾ , 3 x 1

Tees

UL Listed / FM Approved

Water Meter Coupling

Water Meter Flange